• Home
  • Global Directory
  • Contact
  • Official S&P Youtube channel
  • Official S&P Flickr Photostream
  • Share:
    Plate mounted axial flow fans
    COMPACT Series type HCBB / HCBT (Aluminium impellers)

    HCBB/4-400/H- *230V 50* V3

    Range of low profile plate mounted axial fans fitted with aluminium impellers and single phase motor (HCBB) or three phase motor (HCBT), IP65 (1), Class F insulation (2), equipped with thermal protection (3).
    (1) Models 800, 900 and 1000 are IP55. (2) Working temperatures from -40�C up to +70�C. Except models � 800, 900 and 1000 suitable for usage in environments from -20�C to +40�C. (3) Except models � 800 to 1000.

    Motors
    Available, depending upon the model, with single or three phase motors in 4 or 6 poles. All motors are speed controllable by autotransformer except models /4-630, B/710, T/4-710, T/800, T/900 and T/1000.Three phase models are speed controllable by inverter.
    Electrical supplies:
    Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
    Three phase 230/400V-50Hz or 400V-50Hz (See characteristic chart).

    Additional Information
    Standard air direction: form (A) configuration (Motor over Impeller).

    On request
    Inlet finger proof guard for models 800 to 1000.
    HCBB/4-400/H- *230V 50* V3

    More Views

    PROTECTION

    Versiones

    On request, explosion proof versions in accordance with ATEX Directive, for three phase models.
    - Motors IP55, Class F
    - ATEX Flameproof-Gas
    For models 800 to 1000mm
    II 2G Ex d IIB T4
    II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)
    - ATEX Increased safety-Gas
    Except models HCBT/ 4-250, HCBT/ 6-355, HCBT/ 6-400
    Available model HCBT/ 6-400 with 230/400 V motor
    Available models to HCBT-1000
    II 2G Ex e II T3
    - ATEX Dust
    For models 800 to 1000mm
    Suspended flammable particles and non-conductive dust:
    II 3D Ex tc IIIB T125�C
    Conductive dust:
    II 3D Ex tc IIIC T125�C (with IP65 motor)

    Working temperatures for ATEX versions:
    -20�C to +55�C
    models HCBT/4-315 to HCBT/4-710
    models HCBT/6-450 to HCBT 6-710
    -20�C to +40�C
    model HCBT/4-800 to 1000
    model HCBT/6-800 to 1000
    To select HCBT ATEX refer to Easyvent.Note electrical data may vary for ATEX motors."

    Compact design
    Compact design created by the combination of the motor with the factory matched direct drive wrap around impeller hub.

    Corrosion resistance
    Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish.
    Stainless steel screws.

    Terminal box
    Wiring terminal box with cable gland PG-11.

    Impeller dynamically balanced
    Impellers are dynamically balanced, according to ISO 1940 standard, giving vibration free operation.

    Manufacturing variations
    Multiple manufacturing variations, depending on the type of installation and use conditions.

    Configuration for models � 800 to 1000
    Special design of motor over impeller, which provides compactness and tightness
    IP55.

    "
    "
    "
    "
    Instructions