• Home
  • Global Directory
  • Contact
  • Official S&P Youtube channel
  • Official S&P Flickr Photostream
  • Share:
    Belt driven cabinet fans
    CVTT Series

    CVTT-12/12

    Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation.
    All models incorporate a double inlet low pressure centrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the right hand side of the unit when viewed from the discharge end.

    Motors
    All motors are IP55, class F insulation.
    Electrical supply:
    Three phase 230/ 400V-50Hz, up to 3 kW.
    400V-50Hz, for higher motor powers.

    Single phase
    230V-50Hz, with a maximum of 1,5 kW (CVTB version).
    All motor up to 2,2 kW are mounted onto the fan casing scroll.
    All motor above 3 kW are mounted onto an adjoining support frame.
    All three phase motors are speed controllable by frequency inverter.

    On request
    The belt-driven assembly can be supplied at the left hand side of the unit (TI version), Vertical discharge (code V) configuration.
    Models fitted with circular inlet flanges.
    Double thickness (double skin) panels (17 mm).
    Two speed motors (4/8 and 4/6 poles).
    CVTT-12/12

    More Views

    Versions

    ATEX versions
    On request, explosion proof versions in accordance to ATEX Directive, for three phase models up to 11 kW:
    - ATEX Flameproof -Gas:
    II 2G Ex d IIB T4
    II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)
    - ATEX Increased safety-Gas:
    II 2G Ex e II T3
    To select CVTT refer to performance curves, or Easyvent.
    The consumption data (A, W) of ATEX products may vary from the data shown in technical characteristic charts."

    Low noise level
    Acoustic insulation of 7 mm thickness flame retardant (M1) melamine foam reducing the noise level significantly.

    Flexible coupling at the discharge
    To reduce vibration and noise transmissions to the installation.

    Robustness
    Quality finishing, with aluminium corners providing a high robustness.

    Versatile outlet discharge
    Vertical discharge models available under request.

    Anti-vibration mounts
    The fan is mounted on base frame with silent-blocks to reduce vibration and noise transmissions to the installation.

    "
    "
    "
    Instructions