-
Home
- CADB-T-HE-ECOWATT
CONFIGURABLE HIGH-EFFICIENCY HEAT RECOVERY UNITS
CADB/T-HE ECOWATT Series
CADB/T-HE ECOWATT Series
CADB-T-HE-ECOWATT
Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54).
Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.
Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB/T-HE DC ECOWATT
Heat recovery units with built-in low pressure hot water coil.
CADB/T-HE DI ECOWATT
Heat recovery units with built-in electric heater battery.
The 3-Way valve is provided as an accessory (see accessories table for this series)
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F.
Fans
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE ECOWATT models, comply with the efficiency requirements of the ErP Directive.
Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
Additional information
Single phase (CADB-HE) and three phase models (CADT-HE).
Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
Configurable and airtight supply and exhaust spigots, suitable for horizontal installation.
Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB/T-HE DC ECOWATT
Heat recovery units with built-in low pressure hot water coil.
CADB/T-HE DI ECOWATT
Heat recovery units with built-in electric heater battery.
The 3-Way valve is provided as an accessory (see accessories table for this series)
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F.
Fans
Plug-fan with backward curved impeller.
All fans installed in CADB/T- HE ECOWATT models, comply with the efficiency requirements of the ErP Directive.
Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
Additional information
Single phase (CADB-HE) and three phase models (CADT-HE).
Airflows from 400 to 5400 m3/h at 150 Pa of static pressure available.All versions and models include by-pass. Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
Attributes
Low noise level and robust construction
Casing with double skinned 25 mm panels with thermoacoustic flameproof insulation M0, with high-quality finish and plastic corners.
Pressure ports
behind and after filters, to control their cleaning.
High-efficiency motors
Incorporating Plug-fans with EC single-phase motor.
Bypass
All versions include internal bypass (approximately 75% airflow).
Counterflow heat exchanger
high-efficiency (up to 93%), EUROVENT certified.
High-efficiency filters
-F7 Filters: Low pressure F7 filters for supply air.
-M5 Filters: M5 filters for extract air.
Possibility of mounting a second filter (accessory)
Support
Specific supports to allow installation in false ceilings via threaded rods.
